Plasma nitriding increases resistance and minimizes wear.

The heat treatment for heavily loaded workpieces

Better corrosion protection with oxygen

Continuous testing with state-of-the-art methods and technology

Design and manufacture tailored to the treatment task

Plasma nitriding: hard surfaces, strong protection

Since 1996 we have been treating components by plasma nitriding, plasma nitrocarburizing and oxidation.

The specialist hardening shop

Plasmanitriertechnik in brief

Plasmanitriertechnik Dr. Böhm GmbH is a specialist hardening shop for heat treatment in plasma. In short: “We make metal hard with purple light.”

Plasma is an electrically conductive gas. In our processes it acts as a thermochemical catalyst and produces a characteristic glow. In Chemnitz, Germany, we operate 15 plasma nitriding units in which we harden the surface layer of steel, cast iron and sintered materials at 350–570 °C. In addition, we offer process variants that further improve wear and corrosion protection, as well as supplementary services such as cleaning and blasting. We treat components up to Ø 1,550 × 1,700 mm and 2,000 kg. Contract treatment and plant engineering are certified to ISO 9001. Our work also includes materials consulting, research and development, and a capable materials testing laboratory.

Plasma nitriding and more: three surfaces for wear and corrosion protection

All three processes run in a vacuum with very little process gas. Depending on whether wear, fatigue strength or corrosion is the main concern, we use them individually or in combination.

Plasma nitriding in Chemnitz: symbol N plus on brushed steel

Hardness and wear protection

During plasma nitriding, nitrogen forms hard nitrides in the surface layer. As a result, alloyed steels reach more than 1,000 HV, without distortion.

More about contract plasma nitriding

Symbol NC plus for plasma nitrocarburizing on brushed steel

Sliding and running surfaces

Plasma nitrocarburizing adds carbon as well. This creates a thicker compound layer that effectively slows down seizing and adhesive wear.

More about plasma nitrocarburizing

Symbol O plus for oxidation on dark brushed steel

Corrosion protection

When we oxidize after nitriding, a thin magnetite layer of 1–3 µm forms. Depending on the component, it withstands up to 300 h in the salt spray test.

More about oxidation

Plasma nitriding in Chemnitz for single parts, series and large components

15plasma nitriding units, with several batches starting every day
Ø 1,550 × 1,700 mmworking space of the largest unit, larger parts on request
2,000 kgmaximum weight, so heavy tools fit as well
30 yearsof experience, since we were founded in Chemnitz in 1996

Why plasma nitriding when dimensions must be right?

In case hardening or induction hardening, the steel is quenched, so it can distort. Plasma nitriding needs no quenching. Instead, we heat the batch evenly in a vacuum. At the same time, the plasma cleans and activates the surface before the nitrogen diffuses in. Consequently, you can machine your parts to final dimensions beforehand.

  • Because the temperature stays low, there is hardly any distortion.
  • Grinding and straightening are therefore usually unnecessary.
  • Threads and fits stay soft if we mask them mechanically.
  • Stainless steel can be treated because the plasma removes the passive layer.
  • The process is environmentally friendly, since it needs no salt bath and little gas.

Whether your case-hardened part can be switched is shown in our comparison plasma nitriding instead of case hardening (in German).

Open plasma nitriding unit in Chemnitz with a loaded batch rack
Loaded batch before plasma nitriding in our production.

Plasma nitriding unit from Chemnitz for plasma nitriding at the customer's site: vacuum vessel and control cabinet

Units for your own hardening shop

If you want to nitride in-house, we develop and build the plasma nitriding unit to suit your treatment task. Our experience from daily contract treatment flows directly into design and process technology. After commissioning, we remain your point of contact, for example for training, repairs and spare parts.

More about plant engineering

Every order is tested

We test every batch for the required Vickers surface hardness. On request, we also prepare cross-sections, measure nitriding hardness depth and layer thickness, and enclose a report with the delivery. In doing so, we follow the relevant standards, for example DIN EN ISO 18203 for nitriding hardness depth.

TÜV SÜD ISO 9001 certification seal

Contract treatment and plant engineering are certified to DIN EN ISO 9001.

Test methods and measuring equipment

Quality assurance after plasma nitriding with a fully automatic microhardness tester

Frequently asked questions about plasma nitriding in Chemnitz

What is plasma nitriding?

Plasma nitriding is a thermochemical heat treatment in a vacuum. An electrically ignited plasma introduces nitrogen into the surface layer of ferrous materials. The resulting nitrides increase wear resistance and fatigue strength. In addition, they improve the corrosion resistance of unalloyed and low-alloy steels. Other names are ion nitriding and pulsed plasma nitriding.

Which materials can be plasma nitrided?

In principle, all ferrous materials can be nitrided, i.e. structural, quenched and tempered, case-hardening, nitriding and tool steels as well as stainless steels, cast iron and sintered materials. We also treat titanium, but aluminum only after consultation. How hard the surface becomes depends mainly on chromium, molybdenum, aluminum and vanadium. You will find guide values for each steel in our materials table.

How large and heavy can components be?

Our largest unit has a working space of Ø 1,550 × 1,700 mm and carries up to 2,000 kg. If your part is larger, please contact us anyway, because there is often a solution.

How quickly will I get my parts back?

Since several batches start every day, short lead times are the rule. For urgent parts we also offer express treatment, so parts are often ready the next day. We will give you the exact date with our quotation.

Does plasma nitriding replace hard chrome plating or black oxide?

In many applications, yes. Plasma nitrocarburizing followed by oxidation protects against both wear and corrosion. However, it reaches its limits where corrosion protection requirements are very high. You can read more under alternatives to hard chrome (in German).

Standards and further sources

Talk to our materials experts

Send us your drawing, material and requirements, and we will recommend the right process.

We are available Monday to Friday from 7 am to 4 pm (CET) and at weekends by arrangement.